AGIBOT G2

A wheeled industrial humanoid with force-controlled arms, 5 kg rated payload per arm and approximately four hours of battery runtime. G2 combines part handling with equipment interaction.

Payload / arm: 5 kg
Runtime: ≈4 h
Min. passage: 850 mm

Purchase

Short-term rent

Long-term rent

RaaS

350,000SAR

Equipment and configuration are confirmed in your quote.

Get a quote

Compare products

Indicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.

Product profile

Force-controlled handling and machine tending

General-purpose humanoid operationsLoad moving

Product type: Humanoids
Best for: Manufacturing · Warehousing & logistics
Environment: Indoor

What it does for your operation

In your operation

Combine picking, placement and machine tending

G2 brings mobile positioning and two-arm handling to work sequences that involve parts, fixtures and production equipment. Its rated payload is 5 kg per arm or 10 kg across both arms.

Close-up of robotic fingers positioning an electronic device component.

Task performance

Control contact with the part

Force-controlled arms support tasks where the tool must contact a part or fixture. Arm repeatability is ±0.1 mm; end-effector selection and fixture design remain part of the application.

Site fit

Tablet-inspection handling at Longcheer

AGIBOT reports G2 working on a tablet quality-inspection line at Longcheer in Nanchang. The sequence includes collecting material, placing it in inspection equipment and returning finished units.

Safety & sensing

Fit an indoor production environment

G2 has IP42 protection and an operating range of 0–45°C. The base needs an 850 mm navigation passage, with additional clearance for arm movement and the carried load.

Connected systems

Connect the robot to the machine sequence

A machine-tending installation needs equipment signals, part-present checks and fault recovery alongside the robot motion. The assessment should include the actual parts, workstation layout and required cycle time.

Operating conditions

Will it work at your site?

Indoor

Access & operating limits

Access: At least 850 mm clear navigation passage; allow additional room for arm motion and the load.
Operating conditions: 0–45°C operating temperature; assess the floor, pedestrian routes and workstation clearances before deployment.
Workstation setup: Select end effectors for the actual parts and handling task.
Charging: Provide direct charging or battery-swapping access; automatic recharge requires the optional station.

Specify the end effectors, computing configuration and equipment interface for the task. Automatic recharging requires an optional station. The IP42 platform is intended for controlled indoor production conditions.

Typical applications

Industrial pilot

Material handling

Machine tending

Technical specifications.

Rated payload per arm: 5 kg
Rated dual-arm payload: 10 kg
Arm length: 696 mm
Arm repeatability: ±0.1 mm
Arm absolute positioning accuracy: ±1 mm
Dimensions (L × W × H): 760 × 640 × 1,225–1,795 mm
Weight: 185 kg
Minimum navigation passage: 850 mm
Maximum travel speed: 1.5 m/s
Battery runtime: Approximately 4 h
Battery capacity: 1,652 Wh total across two batteries
Charging time: Up to 2.5 h
Charging options: Direct charging or battery swapping; automatic recharge requires an optional station
Degrees of freedom: 25, excluding end effectors
Operating temperature: 0–45°C
Connectivity: Wi-Fi and Bluetooth; 4G/5G optional
Standard computing: 500 TOPS (INT8), 64 GB memory
High-computing configuration: 2,070 TFLOPS (FP4), 128 GB memory

Before you decide.

How is G2 powered through a shift?

Battery runtime is approximately four hours. Direct charging and battery swapping are supported; automatic recharging requires the optional station.

What determines the handling setup?

The part shape, weight, contact tolerances and machine interface determine the end effector and work sequence. G2 is available with standard or high-computing hardware.