Buy Short-term rent Long-term rent RaaS
Deployment and support across MENA
Pudu RoboticsMovers & material handling
MP2000 is a 2,000 kg pallet-handling robot for mapped warehouse transfers. It is designed for floor-level transport, not high-rack stacking.
Indicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.
MP2000 carries pallets between defined pickup and delivery points, with up to 2,000 kg capacity. Its maximum fork height is 200 ±5 mm for floor-level pallet movement.
Load-carrier recognition identifies compatible pallets and corrects pickup alignment by up to 15 cm and 15°. This reduces the need to place each pallet in an exact starting position.
Onboard mapping supports point-to-point deployment. Standard 620 mm or narrow 550 mm outer fork width lets the handling arrangement match the pallet openings.
Depth cameras, 3D LiDAR and other sensors support obstacle detection in mixed warehouse traffic. Manual control provides an intervention path. A site safety assessment sets the operating zones and traffic rules.
Robots exchange route information through distributed fleet coordination. Onboard coordination can continue during loss of the external network.
PUDU Link, APIs, voice commands and task buttons are documented dispatch options. Elevator and automatic-door connections are optional and depend on the site's controls and selected integration equipment.
Choose standard 620 mm or narrow 550 mm fork spacing for the pallet. Maximum fork height is 200 ±5 mm for floor-level transfers; specify access-control interfaces separately.
Manufacturer-documented connections and compatible equipment. Building interfaces are checked against your installation.
Documented interfaces for issuing tasks and connecting the robot to a defined workflow.
Supported task-triggering methods; devices, language and workflow are specified during setup.
Building interfaces are optional and require controller compatibility and commissioning.
No. Its approximately 200 mm maximum fork height supports floor-level pickup and transport.
The system recognizes compatible three-runner and perimeter-base pallets. Match pallet openings to 620 mm standard or 550 mm narrow outer fork width, and check load stability.
The published right-angle aisle figure applies to a 1,200 × 1,000 mm pallet with the 1,200 mm side along the forks. Other pallet dimensions and approach angles need their own layout check.
Compare the approaches and site requirements in these related solution guides.
We help define the right setup for your operation, from site assessment and integration to team training and ongoing support.
Equipment, installation and service responsibilities are agreed in your proposal.
Discuss your deploymentShare your task and location. We’ll help define the configuration and commercial terms.
