In your operation
Deal with spills between scheduled cleans
CC1 Pro detects common wet stains, including coffee and sauce, and plans a local cleaning pass. Staff can respond to a dirty aisle without sending the robot around the entire floor again.
Product1 / 5
Pudu RoboticsCleaning
PUDU CC1 Pro
CC1 Pro combines routine floor care with stain-led cleaning. Its rear camera checks the cleaned area, while separate modes handle hard floors and carpet.
- Full coverage
- 700–1,000 m²/h
- Clean / waste
- 15 / 15 L
- Min passage
- 70 cm
90,000SAR
Own the equipment. Configuration and project scope are confirmed in your quote.
Compare productsIndicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.
Product profile
Routine floor care with targeted spill cleaning
Floor cleaning
- Product type
- Cleaning
- Best for
- Hospitality · Retail · Warehousing & logistics
- Environment
- Indoor
View CC1 Pro
Task performance
Check what the cleaning pass leaves behind
A rear AI camera checks the floor after cleaning and can trigger another pass over residual stains. Cleaning maps help the team locate persistent marks that still need attention.
Task performance
Use the right mode for the floor
Sweeping, scrubbing, vacuuming and dry mopping cover different floor-care tasks. Carpet requires the appropriate vacuuming assembly; it is not wet-scrubbed. Full-coverage output and selective spot-cleaning output are different measures.
- Full coverage
- 700–1,000 m²/h
Safety & sensing
Navigate busy commercial interiors
Visual positioning and LiDAR support mapped routes. Obstacle sensing helps the robot respond to people and objects; the site survey checks positioning setup, stairs, floor transitions and narrow sections.
- Minimum passage
- 70 cm
Daily operation
Reduce routine servicing trips
The optional workstation handles charging, water refill and drainage, with brush and squeegee self-cleaning. Staff still inspect waste, filters and consumables. Component monitoring helps identify issues that could leave the floor dirty again.
Connected systems
Follow the job from PUDU Link
PUDU Link provides task and robot-status visibility. Optional elevator and gate interfaces can extend routes across controlled areas, subject to the building's equipment and the selected integration package.
Operating conditions
IndoorWill it work at your site?
Cleaning surfaces
- Tile
- Marble & terrazzo
- Epoxy resin
- Artificial stone
- Short-pile carpet
Floor finish, condition and the required operating mode are checked during your site assessment.
Access & operating limits
- Hard floors
- Match the pad, detergent and water setting to the floor finish. Use on flat, light-soil indoor floors at 0–40 °C; avoid heavy oil.
- Carpet
- Use the appropriate vacuum configuration; do not wet-scrub carpet.
- Route
- Provide more than 70 cm clearance, preferably over 75 cm in long corridors, plus turning and docking space. Protect drop edges with barriers; assess thresholds and slopes.
- Water servicing
- A connected station needs suitable water, drainage and power. Include daily brush and waste checks in the operating plan.
Specify the carpet configuration, pads and optional water station. CC1 Pro and CC1 Pro Disc are separate models.
Typical applications
Floor cleaning
Systems & infrastructure
Integrations and compatibility.
Manufacturer-documented connections and compatible equipment. Building interfaces are checked against your installation.
PUDU Link
Manufacturer robot-management platform for task progress, status and cleaning reports.
Optional elevator and gate interfaces
Manufacturer-supported building interfaces. Controller compatibility and installation scope must be checked for the actual site.
Technical specifications.
- Full-coverage output
- 700–1,000 m²/h
- Spot-cleaning output
- 1,500–3,000 m²/h, selective cleaning
- Cleaning modes
- Scrubbing, sweeping, vacuuming and mopping
- Scrubbing / sweep-vacuum runtime
- 5 h
- Carpet-vacuum runtime
- 4 h
- Silent-mopping runtime
- 9 h
- Charging
- About 3 h
- Clean-water tank
- 15 L
- Recovery tank
- 15 L
- Dimensions
- 629 × 552 × 695 mm
- Weight
- 75 kg
- Minimum passage
- 700 mm
Before you decide.
How is CC1 Pro different from CC1?
The Pro adds stain-led cleaning and a rear camera to check the floor after cleaning. Compare the exact hardware generation and accessories in the quote.
Is 3,000 m²/h its normal cleaning rate?
No. That figure applies to selective spot cleaning. Manufacturer full-coverage output is 700–1,000 m²/h; obstacles and repeated passes reduce real-site output.
Does it clean carpet and hard floors?
Different assemblies and modes serve different surfaces. Carpet is vacuumed, not wet-scrubbed; confirm the carpet kit and floor-care settings.
Does the dock remove all daily maintenance?
No. Automatic water handling reduces routine work, but staff still check brushes, filters, waste and consumables. Docking equipment must be specified.
Explore the application.
Compare the approaches and site requirements in these related solution guides.
W—ROBOTICS deployment & supportThe robot is part
The robot is part
of the solution.
We help define the right setup for your operation, from site assessment and integration to team training and ongoing support.
Equipment, installation and service responsibilities are agreed in your proposal.
Discuss your deploymentLet’s talk about
your project.
Share your task and location. We’ll help define the configuration and commercial terms.
PUDU CC1 Pro
PUDU CC1 ProIndicative · 90,000 SAR
Get a quote