Product1 / 3

Pudu RoboticsCleaning

PUDU CC1

CC1 brings sweeping, scrubbing, vacuuming and dry mopping into one mobile platform, with optional water servicing to reduce repeated trips back to a cleaning cupboard.

Cleaning output: 700–1,000 m²/h
Clean / waste: 15 / 15 L
Cleaning modes: 4

Finish

Equipment

Robot onlyWith workstation

Purchase

Short-term rent

Long-term rent

RaaS

82,500SAR

Own the equipment. Configuration and project scope are confirmed in your quote.

Get a quote

Compare products

Indicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.

Product profile

Four cleaning modes. One daily floor-care route.

Floor cleaning

Product type: Cleaning
Best for: Hospitality · Warehousing & logistics
Environment: Indoor

CC1 in action

In your operation

Bring routine floor care onto one platform

Use separate sweeping, scrubbing, vacuuming and dry-mopping modes for the site's cleaning plan. Teams can assign recurring routes while keeping staff available for edges, spills and tasks that need a person.

Manufacturer demonstration of hard-floor cleaning.

Task performance

Separate hard-floor work from carpet care

Wet scrubbing serves suitable hard floors. Carpet vacuuming uses a separately specified assembly, so the quote must match the surfaces on your route. PUDU lists 700–1,000 m²/h for cleaning output; site conditions determine actual coverage.

Cleaning output: 700–1,000 m²/h

Safety & sensing

Map routes without changing the building

Visual and laser navigation support autonomous movement through commercial interiors. Obstacle sensing helps the robot react along its route, while a pull-out handle allows staff to guide it when needed.

Daily operation

Resume cleaning after a charging stop

CC1 returns to charge when needed and resumes from its saved cleaning position. Stated runtime is about 5 h for scrubbing, 4 h for carpet vacuuming and up to 9 h for silent mopping.

Scrubbing runtime: 5 h

Daily operation

Choose water servicing that fits your site

Optional fixed or mobile water-service equipment can refill and drain the robot. A mobile station offers an alternative where fixed plumbing is unsuitable. Charging and water stations are separate equipment choices, not assumed standard inclusions.

Connected systems

Review completed cleaning routes

PUDU Link and the merchant platform provide remote robot and cleaning-task management. Cleaning reports record covered area and operating time. An optional elevator interface extends routes through compatible building controls.

Configuration & accessories.

Compare the setups. Your selection carries through to the enquiry.

PUDU CC1 with optional docking and water stations — Workstation equipment is optional and sold separately.

Core setup

Robot only

Manual water refilling and drainage.

Cleaning accessories matched to the floor.
Charging equipment specified in your quote.

Optional equipment

With workstation

Automatic water refilling and drainage.

Docking and water equipment quoted separately.
Station layout and connections need a site check.

The quote confirms every included item. Carpet assembly, stations, installation and service are specified separately.

Operating conditions

Will it work at your site?

Indoor

Cleaning surfaces

Tile
Marble & terrazzo
Concrete
Epoxy resin
Artificial stone
Vinyl
Wood
Short-pile carpet

Floor finish, condition and the required operating mode are checked during your site assessment.

Access & operating limits

Hard floors: Select pads, detergent and water settings for the finish.
Carpet: Use the separate vacuum assembly; do not wet-scrub carpet.
Water servicing: Choose manual servicing, a connected station or a compatible mobile-water station.
Daily care: Check brushes, filters, waste and consumables; provide clear access to the charging point.
Route access: More than 700 mm clear passage, with more than 750 mm recommended along long corridors; allow separate room for turning and docking.

Carpet vacuuming uses a separate assembly. Fixed and mobile water-service stations are optional; pads and detergent are selected for the floor finish.

Typical applications

Floor cleaning

Systems & infrastructure

Integrations and compatibility.

Manufacturer-documented connections and compatible equipment. Building interfaces are checked against your installation.

PUDU Link and merchant platform

Remote robot and task management; cleaning reports include area and operating time.

Optional elevator interface

Requires compatible building controls and the corresponding interface equipment.

Technical specifications.

Cleaning modes: Sweeping, scrubbing, vacuuming and mopping.
Cleaning output: 700–1,000 m²/h under manufacturer conditions.
Clean-water tank: 15 L.
Recovery tank: 15 L.
Maximum suction: 17,000 Pa.
Scrubbing runtime: About 5 h.
Carpet-vacuum runtime: About 4 h.
Silent-mopping runtime: Up to 9 h.
Charging: Under 3 h.
Carpet configuration: Separate vacuum assembly required.
Dimensions: 663 × 568 × 682 mm.
Route clearance: Greater than 700 mm; greater than 750 mm recommended for long corridors.

Before you decide.

Can one CC1 clean both carpet and hard floors?

Yes, with the appropriate assemblies and modes. The manufacturer notes that the carpet vacuum assembly is sold separately; wet scrubbing is for suitable hard floors.

Does CC1 include automatic water servicing?

That depends on the chosen station and package. Refill/drain infrastructure and mobile-water options need to be specified separately.

What does CC1 Pro add?

The Pro focuses on stain-led cleaning and rear-camera checks. Compare exact generations and included equipment rather than treating them as interchangeable.

Will its hourly output match the brochure?

Not necessarily. A site plan must allow for furniture, blocked aisles, turns, re-cleaning and servicing. Measure usable coverage during a pilot.

Do staff change tools between hard floors and carpet?

Yes. For scrubbing, use scrubbing rollers, the filter box and squeegee, with side brushes removed. Carpet vacuuming uses sweeping rollers, the dust box and the separately sold carpet assembly, also without side brushes. In More → Switch Roller Brush, lower the compartment, fit and latch the rollers, then select Installation Complete. Schedule this staff task between different floor-care routes.