In your operation
Vacuum the route without assigning a person to every pass
MT1 Vac combines sweeping, vacuuming and dust mopping for recurring dry-floor care. It is intended for dust and debris, not wet scrubbing or liquid-spill recovery.
Product
Pudu RoboticsCleaning
PUDU MT1 Vac
MT1 Vac combines carpet vacuuming with dry cleaning on hard floors. Use it where hotel corridors, offices or retail zones change floor type along the route. Select brushes, filtration and service intervals for the surfaces and dust on your site.
- Cleaning output
- ≤1,400 m²/h
- Dust bags
- 14 L
- Vacuum width
- 55 cm
75,000SAR
Own the equipment. Configuration and project scope are confirmed in your quote.
Compare productsIndicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.
Product profile
Dry floor care for carpet and hard floors.
Floor cleaning
- Product type
- Cleaning
- Best for
- Hospitality · Warehousing & logistics
- Environment
- Indoor
MT1 Vac overview
Task performance
Adjust suction when the floor surface changes
Floor recognition adjusts suction and brush speed between carpet and hard floors. The vacuum head cleans a 55 cm path, while side brushes provide a 70 cm sweeping width.
- Vacuuming width
- 55 cm
Safety & sensing
Keep dust inside the collection system
Separate waste and dust collection uses a 6 L bin and two 7 L bags. The specification lists H11 filtration as standard and H13 as an option; the filter grade must match the supplied configuration.
Site fit
Reach routes under low fixtures
The stated clearances are 75 cm wide and 52 cm high. Route setup checks low furniture, hanging fabric, loose mats and floor transitions.
- Minimum passage
- 75 cm
Daily operation
Make the remaining manual work easier
Tool-free modules simplify brush, bin and dust-mop replacement. A hand-vacuum extension reaches furniture and high surfaces, but is used by a person. Automatic charging supports repeated scheduled runs.
Operating conditions
IndoorWill it work at your site?
Cleaning surfaces
- Tile
- Marble & terrazzo
- Concrete
- Short-pile carpet
Floor finish, condition and the required operating mode are checked during your site assessment.
Access & operating limits
- Carpet
- Test pile, fringes, loose mats and transitions with the selected brush.
- Filtration
- H11 is standard; H13 is optional. Hazardous dust needs a separately qualified cleaning process.
- Access
- Allow 75 cm passage and at least 52 cm overhead clearance.
- Daily care
- Check the debris bin and dust bags; keep the charging point accessible.
Vacuuming, sweeping and dry mopping; no wet scrubbing. The vacuum head is 55 cm wide, but minimum passage is 75 cm. H13 filtration is an optional configuration.
Typical applications
Floor cleaning
Systems & infrastructure
Integrations and compatibility.
Manufacturer-documented connections and compatible equipment. Building interfaces are checked against your installation.
PUDU Link
Monitor robot status and manage cleaning tasks.
Elevator and gate interfaces
Optional equipment connects routes through compatible building access systems.
Technical specifications.
- Functions
- Sweeping, vacuuming and dry mopping.
- Maximum cleaning output
- 1,400 m²/h.
- Sweeping width
- 700 mm.
- Vacuum width
- 550 mm.
- Dust bags
- 14 L combined, 2 × 7 L.
- Debris bin
- 6 L.
- Filtration
- H11 standard; H13 optional.
- Runtime
- 3–6.5 h; standard hard-floor sweep/vacuum mode 4 h.
- Charging
- Under 3.5 h.
- Dimensions
- 840 × 600 × 490 mm.
- Weight
- 75 kg.
- Minimum passage
- 750 mm.
- Minimum overhead clearance
- 520 mm.
Before you decide.
Can one MT1 Vac clean carpet and hard floors?
Both are intended applications. Brushes, suction settings, carpet pile and transitions still need testing on the actual route.
Does it also wash hard floors?
No. Sweeping, vacuuming and dust mopping are dry processes. Wet scrubbing requires a different model.
Is H13 filtration standard?
No. The official product page lists H11 as standard and H13 as optional. Confirm the filter included in the supplied configuration.
How often must bags be changed?
That depends on dust load and operating hours. The combined 14 L bag capacity is not a fixed service interval; inspect bags during the pilot and set a maintenance schedule.
Explore the application.
Compare the approaches and site requirements in these related solution guides.
W—ROBOTICS deployment & supportThe robot is part
The robot is part
of the solution.
We help define the right setup for your operation, from site assessment and integration to team training and ongoing support.
Equipment, installation and service responsibilities are agreed in your proposal.
Discuss your deploymentLet’s talk about
your project.
Share your task and location. We’ll help define the configuration and commercial terms.
PUDU MT1 Vac
PUDU MT1 VacIndicative · 75,000 SAR
Get a quote