Product

Pudu RoboticsCleaning

PUDU SH1

SH1 is a powered scrubber operated by a person, not an autonomous robot. It suits spot cleaning and detailed floor care where staff need a compact machine that washes and recovers dirty water in one pass.

Scrubbing width: 44 cm
Water tanks: 4 L / 4 L
Runtime: 70–100 min

Purchase

Short-term rent

Long-term rent

RaaS

14,300SAR

Own the equipment. Configuration and project scope are confirmed in your quote.

Get a quote

Compare products

Indicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.

Product profile

Scrub and recover dirty water in one manual pass.

Floor cleaning

Product type: Cleaning
Best for: Hospitality · Warehousing & logistics
Environment: Indoor

SH1 cleaning system

In your operation

Scrub and recover water in one pass

SH1 applies cleaning solution, brush pressure and suction while an operator guides it. Its compact upright format suits detailed floor care around furniture and service areas.

Task performance

Match brush pressure and recovery to the job

A 44 cm cleaning width serves compact commercial spaces. Choose the brush or pad and detergent for the floor finish and the type of dirt.

Working width: 44 cm

Configuration

Reach surfaces beyond the main floor

Optional attachments extend cleaning to glass, walls and corners. Select these separately from the main floor-cleaning head.

Safety & sensing

Recover water while cleaning

The squeegee collects dirty solution as the machine moves. Check floor dryness and squeegee condition, and mark the area while cleaning.

Daily operation

Empty and clean the parts without dismantling the machine

Removable tanks, brushes, squeegees and battery simplify end-of-shift care. The display reports tank and component issues. The inner filter box for separating solid waste is purchased separately.

Clean / recovery tanks: 4 / 4 L

Operating conditions

Will it work at your site?

Indoor

Cleaning surfaces

Tile
Marble & terrazzo
Concrete

Access & operating limits

Site planning: A trained operator stays with the machine. Check floor finish, brush/pad and chemical compatibility; do not wet-scrub carpet or water-sensitive flooring. Plan clean-water refill, dirty-water disposal, battery charging and daily squeegee cleaning.

A trained operator stays with this walk-behind scrubber. Match brushes and detergent to the hard floor; water refill and waste disposal are manual tasks.

Typical applications

Floor cleaning

Technical specifications.

Brush cleaning width: 440 mm; squeegee width: 490 mm.
Clean and waste water tanks: 4 L each.
Published productivity: 1,100–1,600 m²/h, dependent on operator and layout.
Runtime: 70 min standard / 100 min eco.
Charging: 2.5 h.
Battery: 18 Ah.
Dimensions: 490 × 530 × 1,200 mm.

Before you decide.

Is SH1 autonomous?

No. A person guides and controls the walk-behind scrubber throughout cleaning.

Where does it fit alongside an autonomous cleaner?

It can cover detailed or irregular areas that staff still clean manually, while an autonomous robot handles suitable repeatable routes. Site trials determine the division of work.

How long can it operate per charge?

Runtime is 70 minutes in standard mode or up to 100 minutes in eco mode. Water refills and the cleaning pattern may require earlier breaks.

Which floors can it clean?

Use it on water-resistant hard floors with suitable brushes, pads and detergent. Test the selected combination on a small area before cleaning the full floor.