Buy Short-term rent Long-term rent RaaS
Deployment and support across MENA
Pudu RoboticsCleaning
MT1 Max adds 3D perception, adaptive sweeping and clearer traffic signalling for large facilities with changing light, obstacles and vehicle movements.
Own the equipment. Configuration and project scope are confirmed in your quote.
Compare productsIndicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.
Trash recognition and spot-cleaning routes let MT1 Max focus on scattered litter between full sweeps. It suits dry floor maintenance; sticky residue and wet-floor washing remain different cleaning tasks.
Adaptive brush control changes sweeping behaviour for light and heavier debris. A 70 cm cleaning width and 35 L bin support longer dry-sweeping routes before servicing.
The Max combines 3D LiDAR and other sensors for navigation in high-ceiling spaces and changing light. Its obstacle-avoidance strategies include yielding around vehicles and reacting to pedestrians; route risk assessment remains necessary.
A raised warning light, audible alerts and projected signals communicate the robot’s presence around people and vehicles. Their placement helps staff notice it across a shared working floor.
Negative-pressure dust collection and automatic filter cleaning support dry-floor work. Teams still empty waste and inspect brushes and filters. Automatic waste emptying is available with the specified optional station and container.
Maximum full-coverage output is 2,200 m²/h. Spot-cleaning patrols have a separate maximum of 7,000 m²/h, while stated runtime ranges from 5 to 10 h.
Floor finish, condition and the required operating mode are checked during your site assessment.
Dry sweeping on flat, hard indoor and sheltered semi-outdoor routes. Operate at −10 to 45 °C; charge at 0 to 40 °C. Direct sun, rain, snow and extreme weather are outside the operating guidance. Automatic waste emptying requires the optional station.
Manufacturer-documented connections and compatible equipment. Building interfaces are checked against your installation.
Remote monitoring and task management through the manufacturer platform.
Building-specific installation and compatibility verification are required.
Max adds 3D LiDAR and has a higher published full-coverage rate: up to 2,200 versus 1,800 m²/h. Choose using route complexity and site tests, not the spot-cleaning figure alone.
PUDU presents semi-outdoor applications. Exposure, temperature, traction and traffic must be checked for your site; this is not a blanket all-weather claim.
No wet-scrubbing system is specified. It is a dry-sweeping machine, so sticky marks and spills need a suitable scrubber or manual process.
No. That is the spot-cleaning figure. PUDU lists up to 2,200 m²/h for covered cleaning; real output also depends on the route and debris.
Compare the approaches and site requirements in these related solution guides.
We help define the right setup for your operation, from site assessment and integration to team training and ongoing support.
Equipment, installation and service responsibilities are agreed in your proposal.
Discuss your deploymentShare your task and location. We’ll help define the configuration and commercial terms.
