In your operation
Combine sweeping and scrubbing in one pass
BG1 Pro collects debris and scrubs suitable hard floors in one workflow. This reduces the need to schedule separate sweeping and washing passes over the same open area.
Product
Pudu RoboticsCleaning
PUDU BG1 Pro
BG1 Pro combines dry-debris collection and wet scrubbing, with adaptive cleaning, extendable edge reach and optional automated water servicing.
- Clean / waste
- 75 / 60 L
- Scrub width
- 55 cm
- Min passage
- 85 cm
146,300SAR
Own the equipment. Configuration and project scope are confirmed in your quote.
Compare productsIndicative budget only, not a confirmed Saudi retail offer. Configuration, freight, tax, deployment and service are confirmed in your quotation. Rental and RaaS figures are planning estimates.
Product profile
Sweep and scrub large floors in one workflow.
Floor cleaning
- Product type
- Cleaning
- Best for
- Hospitality · Warehousing & logistics
- Environment
- Indoor
BG1 Series overview
Product-series overview. The video may show other versions or optional equipment.
Task performance
Reach closer to walls and shelving
The extendable scrubbing brush works along edges, helping reduce the strip left for manual follow-up. Route planning still needs to account for corners, fixtures and places the chassis cannot reach.
- Scrubbing width
- 550 mm
Task performance
Respond differently to spills and stubborn marks
The adaptive mechanism retracts sweeping components around wet spills and increases brush pressure for stubborn stains. Automatic detergent dosing adjusts delivery to the cleaning task rather than relying on one fixed setting throughout.
Safety & sensing
Detect obstacles with 3D LiDAR and vision
3D LiDAR and visual positioning map the route and detect obstacles in the working area. Sound and light cues communicate the robot’s presence to nearby people.
Daily operation
Make water and consumables easier to manage
An optional station automates refill, drainage and charging. Accessible, snap-on consumables and automatic disc-brush attachment simplify servicing, while staff remain responsible for inspection, waste and periodic maintenance.
- Clean / recovery tanks
- 75 / 60 L
Site fit
Check access before sizing the cleaning plan
The published minimum passage is 85 cm. Maximum full-coverage output is 2,000 m²/h; the 6,000 m²/h figure is for spot cleaning. Space for turning, docking and safe mixed traffic must be checked separately.
- Full coverage, max.
- 2,000 m²/h
Operating conditions
IndoorWill it work at your site?
Cleaning surfaces
- Tile
- Concrete
- Artificial stone
Floor finish, condition and the required operating mode are checked during your site assessment.
Access & operating limits
- Floor care
- Water-resistant hard floors with suitable pads and detergent.
- Access
- At least 85 cm passage, with turning and docking space for the 344 kg robot.
- Water station
- Provide power, water and drainage for automatic servicing.
- Daily care
- Inspect brushes, squeegee, debris bin and recovery tank.
This is the Pro sensor configuration. Confirm the water station, floor loading, turning space and utility connections; daily brush and waste checks remain necessary.
Typical applications
Floor cleaning
Systems & infrastructure
Integrations and compatibility.
Manufacturer-documented connections and compatible equipment. Building interfaces are checked against your installation.
PUDU Link and call devices
Manufacturer task-management platform and supported call accessories.
Optional elevator and gate interfaces
Compatible building controls can be connected through the specified integration equipment.
Technical specifications.
- Navigation
- 3D LiDAR + 3D VSLAM.
- Maximum speed
- 1.2 m/s.
- Clean-water tank
- 75 L.
- Recovery tank
- 60 L.
- Scrubbing width
- 550 mm.
- Full-coverage output
- Up to 2,000 m²/h.
- Spot-cleaning output
- Up to 6,000 m²/h; selective cleaning, not full coverage.
- Maximum runtime
- 7.5 h.
- Minimum passage
- 850 mm.
- Dimensions with squeegee
- 1,195 × 760 × 1,303 mm.
- Weight
- 344 kg.
- Charging
- About 3 h at AC ≥180 V; 4.5 h below 180 V.
Before you decide.
What does Pro add over BG1?
BG1 Pro uses 3D LiDAR with 3D visual positioning and has a maximum speed of 1.2 m/s. The standard BG1 uses LiDAR with 3D visual positioning and reaches 1.0 m/s; their tank sizes are shared.
How much floor can it clean?
Maximum full-coverage output is 2,000 m²/h. The 6,000 m²/h figure describes selective spot cleaning; turns, traffic and service stops affect shift coverage.
What does the servicing station require?
A suitable location with power, water supply and drainage. Station equipment and connection work are listed in the proposal.
Which tasks remain manual?
The team checks brushes and squeegee, empties debris and performs periodic cleaning. The optional station handles water refill, drainage and charging.
Explore the application.
Compare the approaches and site requirements in these related solution guides.
W—ROBOTICS deployment & supportThe robot is part
The robot is part
of the solution.
We help define the right setup for your operation, from site assessment and integration to team training and ongoing support.
Equipment, installation and service responsibilities are agreed in your proposal.
Discuss your deploymentLet’s talk about
your project.
Share your task and location. We’ll help define the configuration and commercial terms.
PUDU BG1 Pro
PUDU BG1 ProIndicative · 146,300 SAR
Get a quote